Innovations

1.METHOD FOR GETTING LONG-TERM ENERGY OF ELECTRICITY AND DEVICE FOR REALIZING IT.

(Without fuel, without refuelling)

This innovation enables to get continuously functioning energy system no demaning a refueling or other actions as it may be for usual systems of energy. It may been functioning for many years. The system may be used directly as energy system and as engine in all spheres of life.


CLEAN REGISTRATION IS
(detailed explanation after meeting only)

We can been helping for realizing it too.

***********************************************************************************************
2.ARRANGEMENT FOR GETTING DETAILS OF DIE-CASTING.
This is device which enables to get castings by die-casting of different dimensions and configurations. The process may be realized by hand and it may be mechanized too. There is possibility to get the castings of good quality and by goo denisty. Besides a pressure of the process may be reached from 1kg/sm2-20000kg/sm2. It may be more...

PATENT IS

(detailed explanation after meeting only)

************************************************************************************************
METHOD OF GETTING DETAILES OF DIFFERENT CONFIGURATIONS AND DIMENSIONS BY POWDER METALLURGY AND A DEVICE FOR REALIZING IT.

This technology and device may be used for getting details of complicated configurations and dimensions by manufacturing pressure of different levels, by powder metallurgy. It is necessary to notice about the getting of non porous details because of producing any levels of pressure.

(CLEAN REGISTRATION AND REFERENCE OF ACADEMY TOO)

PATENT IS

(DETAILED EXPLANATION AFTER MEETING ONLY)

We can been helping for realizing it too.

****************************************************************************************************
3.THE UNIVERSAL CRUCIBLE MELTING FURNACE

     Can be used for fusion of any alloys.

     The maximum temperature can reach more than 3750 degrees on Celsius.

     The sizes can be from small, compact to industrial

******************************************************************************************************

4.THE METHOD AND THE DEVICE FOR CONSTRUCTION OF HIGHLY STRONG SYSTEMS CAPABLE TO SUSTAIN HUGE PRESSURE.
Maintained pressure can  to reach values more than 10.000 МPа (1МPа = 10.19716 kgs/sm2).

To give to itself these are pressure I will result a comparative example with nuclear explosion.
It is a question of air explosion (as Hiroshima) at height, about kilometer 1 megaton of a nuclear bomb.

     Distance: 34м from explosion epicenter
     Temperature: 2 million ° C. Internal jump and bomb steams are in a layer of 8-12 m from an explosion place, peak of pressure to 17 000 МPа on distance of 10,5 m, density ~ in 4 times are more than air density, speed of ~100 km/s. Area of hot air: pressure upon border 2.500 МPа, in area to 5000 МPа.
    

     Range of application: machines, mechanisms, building.

     For example, the submarine constructed with application of this method, can fall on depth of the Mariana hollow.

*********************************************************************************************************
5.COMPLETELY A FOLDING-MODULAR CRANKED SHAFT OF HIGH DURABILITY FOR PISTON ENGINES WITH REPLACEMENT OR REPAIR POSSIBILITY NECESSARY SECTION, INSTEAD OF ALL CRANKED SHAFT.
Can undoubtedly cause interest in a car of manufacturers.


All innovations are registered. Corresponding documents are available.